Resources
CTE
Resources
Curated machining knowledge, tools, and pathways — organized by purpose.
MFGAxis — Buyer’s Guide
Company listings, capabilities, certifications, and specialties — organized for buyers and engineers.
Machining References
Curated technical references for machinists and engineers.
Machining Calculators
Feeds, speeds, formulas, and shop calculators.
Wire
Search-driven resource hub for wire.
Hypertherm
Search-driven resource hub for hypertherm.
Roll
Search-driven resource hub for roll.
James
Search-driven resource hub for james.
Molybdenum
Search-driven resource hub for molybdenum.
Ai
Search-driven resource hub for ai.
Vericut
Search-driven resource hub for vericut.
Siemens
Search-driven resource hub for siemens.
Fanuc
Search-driven resource hub for fanuc.
Turnkey
Search-driven resource hub for turnkey.
Super
Search-driven resource hub for super.
Robotmaster
Search-driven resource hub for robotmaster.
Pronest
Search-driven resource hub for pronest.
Online
Search-driven resource hub for online.
Tap
Search-driven resource hub for tap.
Optical
Search-driven resource hub for optical.
Machinist
Search-driven resource hub for machinist.
Broaching
Search-driven resource hub for broaching.
Fatigue
Search-driven resource hub for fatigue.
Photo
Search-driven resource hub for photo.
Makino
Search-driven resource hub for makino.
Erp
Search-driven resource hub for erp.
Countersink
Search-driven resource hub for countersink.
Flame
Search-driven resource hub for flame.
Fives
Search-driven resource hub for fives.
Centerless
Search-driven resource hub for centerless.
Garant
Search-driven resource hub for garant.
Filtration
Search-driven resource hub for filtration.
Go
Search-driven resource hub for go.
Dual
Search-driven resource hub for dual.
Okuma
Search-driven resource hub for okuma.
Acme
Search-driven resource hub for acme.
Tapping
Search-driven resource hub for tapping.
Raw
Search-driven resource hub for raw.
Co2
Search-driven resource hub for co2.
Pre
Search-driven resource hub for pre.
Total
Search-driven resource hub for total.
Moving
Search-driven resource hub for moving.
Abb
Search-driven resource hub for abb.
Formula
Search-driven resource hub for formula.
Pick
Search-driven resource hub for pick.
Automating
Search-driven resource hub for automating.
Sic
Search-driven resource hub for sic.
Pipe
Search-driven resource hub for pipe.
Coordinate
Search-driven resource hub for coordinate.
Tramp
Search-driven resource hub for tramp.
Thermal
Search-driven resource hub for thermal.
Cmm
Search-driven resource hub for cmm.
Ceramic
Search-driven resource hub for ceramic.
Case Hardening
Search-driven resource hub for case hardening.
Insert Geometry
Insert identification, lead angle, indexable insert geometry, and selection references.
Boring
Boring heads, U-axis systems, contour boring, and setup references.
Cutting Forces
Cutting-force formulas, machining power, chip load, and speed/feed references.
Workholding
Workholding strategy, zero-point clamping, fixturing, and setup efficiency.
Threading
Threading calculators, tapping guidance, thread milling, and related tooling.
Authors
Browse CTE contributors and subject-matter experts.
Glossary
Definitions of machining and manufacturing terms.
Machining Fundamentals & Tooling References
Core explainers and shop-floor references for speeds, feeds, forces, insert identification, heat treatment, and cutter geometry.
Process Spotlights & Manufacturing Systems
Inspection, automation, digitalization, and application-specific reads that complement the core machining references above.
Do more with CTE
Keep exploring
Stay in the same scroll flow with fresh CTE articles, videos, products, and news instead of hitting a dead-end landing page.
Browse
Keep exploring
Latest articles, videos, products, and news from across CTE that fit the same machining-learning path.
Browse results
Gudel on the move at Fabtech
From moving cobots to novel mobile automation solutions, Güdel Inc. highlighted two new technologies at FABTECH 2025. The equipment included the CoboMover, a 7th-axis linear track purpose-built for collaborative and lightweight robots. The CoboMover is designed to help integrators and end users expand the range of cobot and lightweight robot applications.
Peak Toolworks acquires Southern Carbide
Peak Toolworks, a North American manufacturer and servicer of engineered diamond and carbide cutting tools, has acquired Southern Carbide, Inc., a tooling and sharpening company specializing in industrial cutting tools, sharpening, and repair services designed to extend tool life and reduce production costs.
New QUICK3CHAM Heads for Boring and Enlarging Existing Holes
When surface finish, diameter, straightness, or roundness requirements are closer than traditional drilling operations can produce, it may be necessary to add a drill, endmill or single-point boring tool to the operation, often at the expense of poor chip control.
Turn with Confidence with Tungaloy’s Non-Ferrous Application Series
Achieve next-level precision in your turning applications with Tungaloy's Non-Ferrous Application Series. Engineered with ultra-fine-grained PCD-tipped inserts, this series delivers unmatched edge sharpness, exceptional wear resistance, and flawless surface finishes even at high cutting speeds. Its advanced 3D chipbreaker geometry ensures stable chip control from roughing to finishing.
Face milling cutters handle tool wear, burr formation, breakout challenges
Ceratizit developed its new MaxiMill – S-Power face milling cutters with 12 insert pockets at Ø63 mm and double-sided indexable inserts to handle the tool wear, burr formation, and breakout challenges that the company says are typical in cast iron machining applications.
Sumitomo strengthens support for aerospace industry with business development team
Sumitomo Electric Carbide Inc. (SCI) has strengthened its support for the aerospace industry with the development of its Aerospace Business Development (ABD) Team.
Gear tools for use on universal CNC machines
Advances in 5-axis CNC machining centers and turn-mill machines now enable manufacturers to cut gears with precision and efficiency—using specialized tools designed for multipurpose platforms. Star SU offers a range of tools that work with universal CNC machines to unlock gear manufacturing flexibility.
Giant tooling system machines large and heavy workpieces
The Giant Tooling System (GTS) from Erowa is designed for machining large and heavy workpieces. Engineered specifically for rotary applications such as mill-turn machining, the GTS provides a robust and reliable solution for even the most demanding manufacturing environments.
Insert features serrated cutting-edge geometry for efficient rough milling
Iscar's HELI-ALU LINE of tooling includes a new insert with serrated edges. The new insert, designated as HSM90S APCR 140520R-FWP28, features a radius of 2.0mm (.0787"). It has a super positive and sharp serrated cutting edge geometry, along with a polished rake surface, which ensures efficient milling for aluminum alloys and other non-ferrous materials. (ISO N grade of application)
Automation solution for light, unattended machining
The Sidekick from Methods Machine Tools Inc. pairs with any FANUC RoboDrill for light, unattended machining. Supported by FANUC CRX-10iA/L robot mounted to a standardized table design, the Sidekick holds up to 30 workpieces.
Bourbon With The Editor® – Vargus Pump Shaft Project (Part 2: Milling Operations)
Will, Aaron and Dennis sit down and enjoy a glass of bourbon while discussing the milling operations for the Vargus Pump Shaft Project.
Compact CNC desktop router
The xsTECH Pro CNC desktop router from Tormach, which was designed for education and training environments, combines professional-level machining capabilities and features with a safe, approachable design that fits seamlessly into classrooms, STEM labs and makerspaces, the company says.
