CTE
Resources
Curated machining knowledge, tools, and pathways — organized by purpose.
MFGAxis — Buyer’s Guide
Company listings, capabilities, certifications, and specialties — organized for buyers and engineers.
Machining References
Curated technical references for machinists and engineers.
Machining Calculators
Feeds, speeds, formulas, and shop calculators.
Wire
Search-driven resource hub for wire.
Hypertherm
Search-driven resource hub for hypertherm.
Roll
Search-driven resource hub for roll.
James
Search-driven resource hub for james.
Molybdenum
Search-driven resource hub for molybdenum.
Ai
Search-driven resource hub for ai.
Browse 51 more topics
Vericut
Search-driven resource hub for vericut.
Siemens
Search-driven resource hub for siemens.
Fanuc
Search-driven resource hub for fanuc.
Turnkey
Search-driven resource hub for turnkey.
Super
Search-driven resource hub for super.
Robotmaster
Search-driven resource hub for robotmaster.
Pronest
Search-driven resource hub for pronest.
Online
Search-driven resource hub for online.
Tap
Search-driven resource hub for tap.
Optical
Search-driven resource hub for optical.
Machinist
Search-driven resource hub for machinist.
Broaching
Search-driven resource hub for broaching.
Fatigue
Search-driven resource hub for fatigue.
Photo
Search-driven resource hub for photo.
Makino
Search-driven resource hub for makino.
Erp
Search-driven resource hub for erp.
Countersink
Search-driven resource hub for countersink.
Flame
Search-driven resource hub for flame.
Fives
Search-driven resource hub for fives.
Centerless
Search-driven resource hub for centerless.
Garant
Search-driven resource hub for garant.
Filtration
Search-driven resource hub for filtration.
Go
Search-driven resource hub for go.
Dual
Search-driven resource hub for dual.
Okuma
Search-driven resource hub for okuma.
Acme
Search-driven resource hub for acme.
Tapping
Search-driven resource hub for tapping.
Raw
Search-driven resource hub for raw.
Co2
Search-driven resource hub for co2.
Pre
Search-driven resource hub for pre.
Total
Search-driven resource hub for total.
Moving
Search-driven resource hub for moving.
Abb
Search-driven resource hub for abb.
Formula
Search-driven resource hub for formula.
Pick
Search-driven resource hub for pick.
Automating
Search-driven resource hub for automating.
Sic
Search-driven resource hub for sic.
Pipe
Search-driven resource hub for pipe.
Coordinate
Search-driven resource hub for coordinate.
Tramp
Search-driven resource hub for tramp.
Thermal
Search-driven resource hub for thermal.
Cmm
Search-driven resource hub for cmm.
Ceramic
Search-driven resource hub for ceramic.
Case Hardening
Search-driven resource hub for case hardening.
Insert Geometry
Insert identification, lead angle, indexable insert geometry, and selection references.
Boring
Boring heads, U-axis systems, contour boring, and setup references.
Cutting Forces
Cutting-force formulas, machining power, chip load, and speed/feed references.
Workholding
Workholding strategy, zero-point clamping, fixturing, and setup efficiency.
Threading
Threading calculators, tapping guidance, thread milling, and related tooling.
Authors
Browse CTE contributors and subject-matter experts.
Glossary
Definitions of machining and manufacturing terms.
Machining Fundamentals & Tooling References
Core explainers and shop-floor references for speeds, feeds, forces, insert identification, heat treatment, and cutter geometry.
Process Spotlights & Manufacturing Systems
Inspection, automation, digitalization, and application-specific reads that complement the core machining references above.
Do more with CTE
Browse
Keep exploring
Latest articles, videos, products, and news from across CTE that fit the same machining-learning path.
Browse results
EVN Grinding Oil
EVN provides additional benefits over normal grinding oils. Its combination of low viscosity (5.4 cSt) coupled with a high flash point (370 degrees F) is not possible in petroleum based products. That means that EVN improves flushing, which helps grinding performance while also providing the increased safety features.
FSH Solid Carbide Thread Mills
The FSH combines the latest in substrate and coatings with multiple flutes and the highly effective left-hand helix design to achieve both better performance and longer tool life in today's hard-to-machine materials. Manufacturers who have previously attempted to use taps in small-hole threading understand that, especially in heat- resistant materials, breakage is a frequent occurrence.
BA W06 Enhanced
The new version of the machine offers a more flexible and therefore more precise machining process. The BA W06 features variable spindle distance of 590.00 mm – 651.00 mm. Travel in the Y- and Z- axes 630 mm and 510 mm, respectively. The independent Z-axis enables machining coupled with compensation value.
BA space3
With an installation of footprint of 25.3m2, the machine is the largest in SW's repertoire. It features a working rage of 3,000 x 1,800 x 875 mm on the X-, Y- and Z-axes respectively.
The UP! Network wins mobile application award
The UP! Network has been awarded a MobileWebAward from the Web Marketing Association (WMA), winning the Best Manufacturing Mobile Application award in the "Best of Industry" category.
ARCH Cutting Tools launches master catalog
ARCH Cutting Tools in Bloomfield Hills, Michigan, released its first fully integrated master catalog, titled "The Collection."
Starrag at forefront of ‘growing’ industry
Starrag is a manufacturer high-precision machine tools for milling, turning, boring and grinding workpieces for a variety of industries. Its rigid and robust equipment can also be used for making farming equipment.
EWN Smart Damper Precision Boring Heads
BIG KAISER's modular CK/CKB system allows for versatility in the length of tooling combinations, up to a maximum of 10 times diameter and can run on nearly every major spindle interface. All tools are coolant-through and have three different insert holder options per head size.
GWS Tool Group acquires custom tool manufacturer
The acquisition of Taurus Tool enhances the GWS product portfolio and capabilities in the area of custom HSS tooling and custom thread-on modular tooling, while adding additional capacity for complex carbide hole making and milling tools.
Collet Pad Jaws with Carbinite
Round smooth, round serrated, hex smooth, and square smooth sizes are available for W&S (all sizes), S-style (all sizes), Gisholt, Jones & Lamson, and Martin collet pad types, allowing more varied geometries can be securely gripped. The ability to quickly change between sizes allows shops to expand their machining capabilities, increase their machine cycles by up to 30%, and maximize production.
CentroteX S Clamping Device Change-Over System
The mini version has all the proven centroteX technology, however with an additional advantage: Actuation takes place with just one screw; thus, you save even more set-up time, and this system was designed to enable a robot to quickly change the clamping device.
TungCut Grooving Inserts
Two new grades have been added to TungCut to enhance its capacity in exotic materials: AH8005 insert grade, featuring strong coating adherence to its carbide substrate, eliminates notch wear that typically occurs during the machining of heat-resistant superalloys (HRSAs). New geometries include DGS inserts with 0.05 mm and 0.10 mm (.0002″ and .0004″) corner radii.
