Resources
CTE
Resources
Curated machining knowledge, tools, and pathways — organized by purpose.
MFGAxis — Buyer’s Guide
Company listings, capabilities, certifications, and specialties — organized for buyers and engineers.
Machining References
Curated technical references for machinists and engineers.
Machining Calculators
Feeds, speeds, formulas, and shop calculators.
Wire
Search-driven resource hub for wire.
Hypertherm
Search-driven resource hub for hypertherm.
Roll
Search-driven resource hub for roll.
James
Search-driven resource hub for james.
Molybdenum
Search-driven resource hub for molybdenum.
Ai
Search-driven resource hub for ai.
Vericut
Search-driven resource hub for vericut.
Siemens
Search-driven resource hub for siemens.
Fanuc
Search-driven resource hub for fanuc.
Turnkey
Search-driven resource hub for turnkey.
Super
Search-driven resource hub for super.
Robotmaster
Search-driven resource hub for robotmaster.
Pronest
Search-driven resource hub for pronest.
Online
Search-driven resource hub for online.
Tap
Search-driven resource hub for tap.
Optical
Search-driven resource hub for optical.
Machinist
Search-driven resource hub for machinist.
Broaching
Search-driven resource hub for broaching.
Fatigue
Search-driven resource hub for fatigue.
Photo
Search-driven resource hub for photo.
Makino
Search-driven resource hub for makino.
Erp
Search-driven resource hub for erp.
Countersink
Search-driven resource hub for countersink.
Flame
Search-driven resource hub for flame.
Fives
Search-driven resource hub for fives.
Centerless
Search-driven resource hub for centerless.
Garant
Search-driven resource hub for garant.
Filtration
Search-driven resource hub for filtration.
Go
Search-driven resource hub for go.
Dual
Search-driven resource hub for dual.
Okuma
Search-driven resource hub for okuma.
Acme
Search-driven resource hub for acme.
Tapping
Search-driven resource hub for tapping.
Raw
Search-driven resource hub for raw.
Co2
Search-driven resource hub for co2.
Pre
Search-driven resource hub for pre.
Total
Search-driven resource hub for total.
Moving
Search-driven resource hub for moving.
Abb
Search-driven resource hub for abb.
Formula
Search-driven resource hub for formula.
Pick
Search-driven resource hub for pick.
Automating
Search-driven resource hub for automating.
Sic
Search-driven resource hub for sic.
Pipe
Search-driven resource hub for pipe.
Coordinate
Search-driven resource hub for coordinate.
Tramp
Search-driven resource hub for tramp.
Thermal
Search-driven resource hub for thermal.
Cmm
Search-driven resource hub for cmm.
Ceramic
Search-driven resource hub for ceramic.
Case Hardening
Search-driven resource hub for case hardening.
Insert Geometry
Insert identification, lead angle, indexable insert geometry, and selection references.
Boring
Boring heads, U-axis systems, contour boring, and setup references.
Cutting Forces
Cutting-force formulas, machining power, chip load, and speed/feed references.
Workholding
Workholding strategy, zero-point clamping, fixturing, and setup efficiency.
Threading
Threading calculators, tapping guidance, thread milling, and related tooling.
Authors
Browse CTE contributors and subject-matter experts.
Glossary
Definitions of machining and manufacturing terms.
Machining Fundamentals & Tooling References
Core explainers and shop-floor references for speeds, feeds, forces, insert identification, heat treatment, and cutter geometry.
Process Spotlights & Manufacturing Systems
Inspection, automation, digitalization, and application-specific reads that complement the core machining references above.
Do more with CTE
Keep exploring
Stay in the same scroll flow with fresh CTE articles, videos, products, and news instead of hitting a dead-end landing page.
Browse
Keep exploring
Latest articles, videos, products, and news from across CTE that fit the same machining-learning path.
Browse results
MicroScan3 Laser Scanners
Originally launching in 2016, the microScan3 is an extremely intelligent and durable safety laser scanner that enhances machine availability and productivity due to its safeHDDM scanning technology. It provides flexibility for safe automation processes with simultaneous protective fields, contour detection fields, and detailed data output. In addition, the microScan3 offers a 9-meter protective field range with a scanning angle of 275o.
ISOtunes XTRA 2.0 and ISOtunes LINK
These new Bluetooth products maintain ISOtunes' SafeMax Technology while introducing enhancements in design and functionality. Unlike most headphones, all ISOtunes headphones limit the volume to 85 decibels (dB) and offer a noise reduction rating (NRR) between 22 and 29 dB, making them OSHA and NIOSH compliant.
Camfil plans to rebuild facility after tornado damage
Camfil Air Pollution Control (APC), a manufacturer of industrial dust, fume and mist collection systems, is planning to rebuid a manufacturing facility in Jonesboro, Arkansas, that was was destroyed by a tornado in March.
EcoFilter Conveyor
The second generation EcoFilter® utilizes an innovative two-stage metal chip removal and coolant filtration design. A hinged steel belt conveyor handles primary removal of large chips. In a secondary process, a flow-through filtration cell separates fines from coolant. Heavy duty brushes attached to the bottom side of the belt wipe these fines from the surface of the filter cell, where they flow to the bottom of the conveyor via the patent pending CleanCleat®. Standard angle cleats on the bottom run of the conveyor belt then scrape the separated fine chips back to the top of the belt for discharge.n
Wohlhaupter VolCut Insert Holder
VolCut combines the benefits of the modularity of the Wohlhaupter MVS connection with Allied Machine and Engineering's large diameter holemaking solution. This time-saving combination offers increased material removal and excellent chip control at greater depths for large diameter applications - even on underpowered machines. The VolCut insert holder is stocked for quick delivery with bore diameters ranging from 2.559" – 128.149" (65mm – 3255mm). Its unique designincorporates serrations designated to connect seamlessly with Wohlhaupter's Twin Cutter and AluLine boring systems.
TwinCAT IoT Supports MindSphere
TwinCAT 3 automation software can communicate with HTTP(S) servers as an HTTP(S) client, for example for exchanging data via a REST API. Establishing a connection with MindSphere® is now also possible via this HTTPS communication for exchanging telemetry data. This connection is secured by TLS (Transport Layer Security) and uses MindSphere®-specific authentication mechanisms.
Full slot milling in ISO P
This full slot milling demonstration from Sandvik Coromant focuses on pitch selection for maximum metal removal.
Eriez’ website showcases available refurbished equipment
Eriez in Erie, Pennsylvania, has added a feature to its Website that allows customers to view the company’s refurbished equipment currently available for sale. All of Eriez’ refurbished equipment is repaired by the experts at the company’s 5-Star Service Center, and is backed by an “as new” warranty. The fully staffed service center employs trained […]
Bystar Fiber 3015 and 4020
On average, thanks to the new 15kW laser, the cutting speed of the ByStar Fiber increases by up to 50 percent (when cutting with nitrogen) compared to a 10kW laser source. This means that sheet metal processing companies can benefit from higher productivity with relatively low unit costs. The 15kW laser output now also enables extended applications in stainless steel and aluminum up to 1.5 inch thick and thus offers maximum flexibility for customer orders.
Lynx 2600SY Compact Turning Center
The Lynx 2600SY is designed with a rigid bed structure and incorporates roller type LM guides for all axes. The maximum turning diameter is 14.9" and the maximum turning length is 24", and the main spindle incorporates a 10" chuck while the sub-spindle handles either a 6- or 8-inch chuck size. The main spindle has a speed of 3,500 r/min (25HP) while the sub-spindle turns at 4,500 r/min (15HP), making quick work of complex parts. The Y-axis travel is 4.13", and a 12 station servo-driven BMT tool turret with a half index feature (24 positions) is standard.
GN 8170 Stainless Steel Indexing Plungers
The new GN 8170 stainless steel indexing plungers are intended for use in areas requiring sanitary equipment. They are available in lock-out or non-lock out types with a sealing lock nut that creates a totally hygienic version or without a sealing lock nut.n
Marposs contributes to Henry Ford Technology Award
A tool and process monitoring system from Marposs is part of a project that was named a 2020 Henry Ford Technology Award (HFTA) winning program.
