Resources
CTE
Resources
Curated machining knowledge, tools, and pathways — organized by purpose.
MFGAxis — Buyer’s Guide
Company listings, capabilities, certifications, and specialties — organized for buyers and engineers.
Machining References
Curated technical references for machinists and engineers.
Machining Calculators
Feeds, speeds, formulas, and shop calculators.
Wire
Search-driven resource hub for wire.
Hypertherm
Search-driven resource hub for hypertherm.
Roll
Search-driven resource hub for roll.
James
Search-driven resource hub for james.
Molybdenum
Search-driven resource hub for molybdenum.
Ai
Search-driven resource hub for ai.
Vericut
Search-driven resource hub for vericut.
Siemens
Search-driven resource hub for siemens.
Fanuc
Search-driven resource hub for fanuc.
Turnkey
Search-driven resource hub for turnkey.
Super
Search-driven resource hub for super.
Robotmaster
Search-driven resource hub for robotmaster.
Pronest
Search-driven resource hub for pronest.
Online
Search-driven resource hub for online.
Tap
Search-driven resource hub for tap.
Optical
Search-driven resource hub for optical.
Machinist
Search-driven resource hub for machinist.
Broaching
Search-driven resource hub for broaching.
Fatigue
Search-driven resource hub for fatigue.
Photo
Search-driven resource hub for photo.
Makino
Search-driven resource hub for makino.
Erp
Search-driven resource hub for erp.
Countersink
Search-driven resource hub for countersink.
Flame
Search-driven resource hub for flame.
Fives
Search-driven resource hub for fives.
Centerless
Search-driven resource hub for centerless.
Garant
Search-driven resource hub for garant.
Filtration
Search-driven resource hub for filtration.
Go
Search-driven resource hub for go.
Dual
Search-driven resource hub for dual.
Okuma
Search-driven resource hub for okuma.
Acme
Search-driven resource hub for acme.
Tapping
Search-driven resource hub for tapping.
Raw
Search-driven resource hub for raw.
Co2
Search-driven resource hub for co2.
Pre
Search-driven resource hub for pre.
Total
Search-driven resource hub for total.
Moving
Search-driven resource hub for moving.
Abb
Search-driven resource hub for abb.
Formula
Search-driven resource hub for formula.
Pick
Search-driven resource hub for pick.
Automating
Search-driven resource hub for automating.
Sic
Search-driven resource hub for sic.
Pipe
Search-driven resource hub for pipe.
Coordinate
Search-driven resource hub for coordinate.
Tramp
Search-driven resource hub for tramp.
Thermal
Search-driven resource hub for thermal.
Cmm
Search-driven resource hub for cmm.
Ceramic
Search-driven resource hub for ceramic.
Case Hardening
Search-driven resource hub for case hardening.
Insert Geometry
Insert identification, lead angle, indexable insert geometry, and selection references.
Boring
Boring heads, U-axis systems, contour boring, and setup references.
Cutting Forces
Cutting-force formulas, machining power, chip load, and speed/feed references.
Workholding
Workholding strategy, zero-point clamping, fixturing, and setup efficiency.
Threading
Threading calculators, tapping guidance, thread milling, and related tooling.
Authors
Browse CTE contributors and subject-matter experts.
Glossary
Definitions of machining and manufacturing terms.
Machining Fundamentals & Tooling References
Core explainers and shop-floor references for speeds, feeds, forces, insert identification, heat treatment, and cutter geometry.
Process Spotlights & Manufacturing Systems
Inspection, automation, digitalization, and application-specific reads that complement the core machining references above.
Do more with CTE
Keep exploring
Stay in the same scroll flow with fresh CTE articles, videos, products, and news instead of hitting a dead-end landing page.
Browse
Keep exploring
Latest articles, videos, products, and news from across CTE that fit the same machining-learning path.
Browse results
Neck Gaiter
Made from a moisture-wicking, breathable blend of lightweight polyester and spandex, the Gaiter is designed to keep users dry and comfortable all day with UPF 50+ sun protection and odor-resistant technology. The Gaiter can be worn as a face covering, headband, neck guard, or any other adaptable solution. The Neck Gaiter is washer and dryer safe and will be available in three colors – Gray, Hi-Vis, and Red.
MEAS High-Efficiency Milling Cutters
The MEAS provides you with a broad range of applications from facing, shouldering, slotting, and profiling to pocketing, ramping and plunging. The sharp insert designs feature Kyocera's proprietary hydrogen-free DLC coated PDL025 grade to maintain excellent wear resistance in aluminum.
ALPHA-KUT Quick Change Disks
ALPHA-KUT™ consists of triangular, precision-formed abrasive grains which exhibit the continually self-sharpening properties and wear characteristics of ceramics, delivering a consistent cutting action over a long service life. The grain strength is complemented by a rigid fiber backing for stability, allowing added pressure for maximum stock removal. ALPHA-KUT™ quick change discs are ideal for heavy material removal or hardened materials, such as castings where the sprue is removed, large parts with excessive parting lines, large weld removal in narrow or otherwise inaccessible areas, weld or seam removal and blending, leveling and rough shaping, and more.
MarSurf CM
This compact system was designed with motorized XYZ-axes and enables measurements to be performed directly on large parts for user-friendly surface analysis, anywhere it is needed. The CM mobile is robust and reliable enough to be used on the shop floor or in the field, and provides consistently high resolution even over large measuring areas.n
TDM and TDM Global Line 2020
With the new TDM Global Line 2020 release, users achieve greater transparency regarding their tooling costs and key figures. This is possible because each user can now individually configure their TDM Global Line dashboard. The relevant reports can then either be displayed in the dashboard, printed out or simply transferred to Excel.
Solid Carbide Radius Fillet End Mills, CR-Supercut High Feed End Mills
The Solid Carbide Radius Fillet End Mills are configured for different radius filleting. Available with two, three and four flutes, they also feature a cylindrical shank DIN 6535 HA. The CR-Supercut High Feed End Mills are designed for high feed rates with shallow cutting depths for a wide range of materials up to 56 HRC. The CR- Supercut line is ideal for High Performance Cutting (HPC) in a variety of hard-to- machine materials.n
FixtureBuilder 8.0
The software allows users to design metrology fixturing set-ups without having to use co-ordinate measuring machines (CMM) and other inspection devices. This reduces the amount of set-up time and increases productivity. It can be used with a CAD model of the part, which is imported into FixtureBuilder. The entire fixturing set-up, along with the part, can then be exported into inspection programming software.
New coolant sensor tech seeks strategic partner
Developed by Josef Maatuk, a consultant at Los Angeles-based Max Em Engineering, a new unifying smart sensor designed for autonomous fluid management systems is said to monitor, in real time, the heat removal capability of coolant, acidity levels, amount of coolant, and the temperature of the coolant across the height, rather than a single point.
Unifying coolant sensor solution in search of a home
Developed by Josef Maatuk, a consultant at Los Angeles-based Max Em Engineering, a new unifying smart sensor designed for autonomous fluid management systems is said to monitor, in real time, the heat removal capability of coolant, acidity levels, amount of coolant, and the temperature of the coolant across the height, rather than a single point.
Robotic CNC Machine Tending
Cutting Tool Engineering debuts a new video series, Cobotics Corner. Watch a brief demonstration of a robotic CNC machine tending operation on a Haas VF2SS with a Universal Robots UR5e and a Robotiq Dual Hand-E.
F-122 Compact 5-Axis Motorized Fiber Positioning System
The F-122 motorized 5DOF positioning stage is a compact solution for aligning (silicon) photonics and optics components, such as fibers, waveguides, lenses. As the leading innovator of high precision motion control solutions for 50 years, PI offers a host of 3-axis XYZ to 6-axis precision motion systems for automation and research.n
HFKS-2G Power Chuck
Ideal for high volume lathe and mill turn applications, the HFKS-2G is optimum for heavy duty precision machining of easily deformed workpieces. Thanks to flats on the chuck body technology and lighter weight, the ability to use shorter tools to gain closer access to workpieces provides added parts precision and cost efficiency.n
