Resources
CTE
Resources
Curated machining knowledge, tools, and pathways — organized by purpose.
MFGAxis — Buyer’s Guide
Company listings, capabilities, certifications, and specialties — organized for buyers and engineers.
Machining References
Curated technical references for machinists and engineers.
Machining Calculators
Feeds, speeds, formulas, and shop calculators.
Wire
Search-driven resource hub for wire.
Hypertherm
Search-driven resource hub for hypertherm.
Roll
Search-driven resource hub for roll.
James
Search-driven resource hub for james.
Molybdenum
Search-driven resource hub for molybdenum.
Ai
Search-driven resource hub for ai.
Vericut
Search-driven resource hub for vericut.
Siemens
Search-driven resource hub for siemens.
Fanuc
Search-driven resource hub for fanuc.
Turnkey
Search-driven resource hub for turnkey.
Super
Search-driven resource hub for super.
Robotmaster
Search-driven resource hub for robotmaster.
Pronest
Search-driven resource hub for pronest.
Online
Search-driven resource hub for online.
Tap
Search-driven resource hub for tap.
Optical
Search-driven resource hub for optical.
Machinist
Search-driven resource hub for machinist.
Broaching
Search-driven resource hub for broaching.
Fatigue
Search-driven resource hub for fatigue.
Photo
Search-driven resource hub for photo.
Makino
Search-driven resource hub for makino.
Erp
Search-driven resource hub for erp.
Countersink
Search-driven resource hub for countersink.
Flame
Search-driven resource hub for flame.
Fives
Search-driven resource hub for fives.
Centerless
Search-driven resource hub for centerless.
Garant
Search-driven resource hub for garant.
Filtration
Search-driven resource hub for filtration.
Go
Search-driven resource hub for go.
Dual
Search-driven resource hub for dual.
Okuma
Search-driven resource hub for okuma.
Acme
Search-driven resource hub for acme.
Tapping
Search-driven resource hub for tapping.
Raw
Search-driven resource hub for raw.
Co2
Search-driven resource hub for co2.
Pre
Search-driven resource hub for pre.
Total
Search-driven resource hub for total.
Moving
Search-driven resource hub for moving.
Abb
Search-driven resource hub for abb.
Formula
Search-driven resource hub for formula.
Pick
Search-driven resource hub for pick.
Automating
Search-driven resource hub for automating.
Sic
Search-driven resource hub for sic.
Pipe
Search-driven resource hub for pipe.
Coordinate
Search-driven resource hub for coordinate.
Tramp
Search-driven resource hub for tramp.
Thermal
Search-driven resource hub for thermal.
Cmm
Search-driven resource hub for cmm.
Ceramic
Search-driven resource hub for ceramic.
Case Hardening
Search-driven resource hub for case hardening.
Insert Geometry
Insert identification, lead angle, indexable insert geometry, and selection references.
Boring
Boring heads, U-axis systems, contour boring, and setup references.
Cutting Forces
Cutting-force formulas, machining power, chip load, and speed/feed references.
Workholding
Workholding strategy, zero-point clamping, fixturing, and setup efficiency.
Threading
Threading calculators, tapping guidance, thread milling, and related tooling.
Authors
Browse CTE contributors and subject-matter experts.
Glossary
Definitions of machining and manufacturing terms.
Machining Fundamentals & Tooling References
Core explainers and shop-floor references for speeds, feeds, forces, insert identification, heat treatment, and cutter geometry.
Process Spotlights & Manufacturing Systems
Inspection, automation, digitalization, and application-specific reads that complement the core machining references above.
Do more with CTE
Keep exploring
Stay in the same scroll flow with fresh CTE articles, videos, products, and news instead of hitting a dead-end landing page.
Browse
Keep exploring
Latest articles, videos, products, and news from across CTE that fit the same machining-learning path.
Browse results
Eyes Vision System
Eyes is ideal for sorting a wide variety of objects or for CNC machine tending with metal parts that are defined by outer shape, as well as many other pick-and-place applications where orientation is important. Eyes also offers depth perception within its affordable and easy-to-deploy 2.5D vision.
DrillMeister Chamfering Holders
DrillMeister offers the TIDCF chamfering holder that can be attached to the TID drill shank allowing chamfering and drilling in a single pass for reduced machining times. The chamfering inserts are available for 30°, 45°, and 60° chamfers. The new TIDCF holder line can accommodate smaller drills in diameters from 7.5 mm to 9.9 mm (.295" - .390") for improved machining processes.
Expansion of Grade AH9130 to DMP Drill Head Line
This AH9130 grade expansion encompasses the DMP line of general-purpose drilling, succeeding the popular DMC drill head for precision drilling. Developed for drilling applications, AH9130 is a nano-multilayer PVD coating consisting of three distinctive layers.
System Configurator for integrated Inverted Microscope Positioning System
Precision positioning of the sample is a must for accurate results when using an inverted microscope. PI provides options with high stability motorized stages for long travel ranges with wide dynamic range, manual sample positioning / prepositioning, piezo scanning stages, and z-positioning / vertical stages to move the sample or the objective.
Milling cast and steel parts more cost-effectively
Whether producing turbochargers, steering knuckles or cylinder blocks, customers can mill cast and steel parts considerably more cost-effectively with the radial insert milling program from Mapal Inc. than with previously available solutions. Since the product launch in 2018, there have been a large number of measurable successes resulting from the use of the tools in the series.
LK Metrology Inc. offers CMM assistance program to medical equipment manufacturers
LK Metrology Inc. has undertaken a targeted CMM assistance program for medical equipment manufacturers that is fully functional and ready to support and enhance their manufacturing capabilities during the COVID-19 crisis.
Monaghan Tooling Group rushes custom ventilator tooling project
Dayton, OH – Custom tooling requests are not unusual at Monaghan Tooling Group, and each gets special attention. They are all important. However, when it's a life-or-death situation, you tend to pull out all the stops.
Tolomatic Inc. develops open-source, low-cost ventilator actuation prototypes for COVID-19 patients
In an effort to support the global need for medical ventilators, Minnesota-based Tolomatic Inc. has dedicated a team of engineers to the development of highly efficient emergency ventilator concept systems using electric linear actuators. The proposed technologies are the first step in creating innovative emergency ventilators for patients around the world.
Liberty Molds Inc. answers call to combat COVID-19
Liberty Molds Inc. recently answered the call to assist with the COVID-19 pandemic. On April 2, the company received a request from Ford Motor Co. to help manufacture components for critically important respirators. Liberty Molds acted quickly and contacted its local Hurco Cos. Inc. representative to expedite the order.
CSD-300II Front Facing Twin Spindle Lathe
For exceptionally quick and accurate turning of a variety of parts, turret index times are as low as .19 seconds, robot cycle times 17.9 seconds and loading times 4.8 seconds. An optimized bed design, with a grooving width of 14mm, renders this lathe exceptionally rigid.
A-H Family of Taps
The EMUGE A-H family of taps is the best solution for tapping extremely abrasive materials and those materials with elevated hardness levels, such as cast iron, common in the heavy equipment and agricultural vehicle markets. EMUGE A-H Taps are now available with or without coolant through holes and with TiCN coating, or NT nitride surface treatment, for improved tool life.
Sinumerik 828D CNC
Additional benefits of ordering the pre-defined packages include a price discount, a simplified ordering process and a shortened lead-time. The program is subject to availability and delivery time will depend upon the stock available in Elk Grove Village, IL. Only customers located in the United States with a physical mailing and delivery address are eligible for this program.
