Resources

Unique to Nikken rotary tables is the innovative and patented carbide worm system comprised of a carbide worm screw, ion nitrided worm wheel (HV930), and hardened steel bearing surface (HRC58-60). The V grade solid carbide worm screw helps to ensure high rigidity and virtually eliminates wear. Compared with traditional worm system combinations (consisting of phosphorus bronze and aluminum bronze), wear is reduced by up to 8 times, and overall accuracy is substantially increased. Additionally, the worm wheel has specially hardened, ion-nitrided treated teeth that eliminate sliding friction.

Products September 6, 2023

Bearing Wheel Covers

Standard sizes are available in stock, ready to ship and are available in diameters of 3/4" to 1-1/2", bore diameters from 3/16" to 1/2" and with widths from 3/8" to 5/8" depending on the type of cover. This is counter to the more traditional availability of these bearing wheel covers, many of which require lead time, minimum orders and tooling.

Products September 6, 2023

M18 FUEL ½” High Torque Impact Wrenches

Harnessing the power of advanced M18 FUEL™ technology, the M18 FUEL™ ½" High Torque Impact Wrench with Friction Ring provides users with the best combination of power and size to maximize productivity. A POWERSTATE™ Brushless Motor delivers nut-busting torque up to 1,500 ft-lbs with a M18™ REDLITHIUM™ XC5.0 Battery and up to 1,600 ft-lbs with Milwaukee's new M18™ REDLITHIUM™ FORGE ™ XC6.0 Battery. With the ability to remove stubborn bolts and nuts, this impact wrench provides professionals with the most power-dense solution, driving maximum productivity on the job.

Products September 6, 2023

JETCROWN

Two coolant through tools with top and bottom outlets for output pressure of up to 340 bars.nSignificantly improves insert tool life. Quick, change fast and easy adapter indexing. User-friendly with a single clamping screw. No set-up time after blade or pocket indexing. Can be used next to the spindle or next to a shoulder as the square adapter and tool shank align with no protrusions. Economical adapters with 4 pockets for TANG-GRIP 2,3- and 4-mm width inserts.nSuitable for all TANG-GRIP inserts including high feed inserts. Designed for higher productivity.

Products September 6, 2023

Trideep

Deep drills with a 3 cutting edged insert (other manufacturers only offer inserts with 1 or 2 cutting edges). Highly accurate peripherally ground insert, provides high hole diameter accuracy of IT10.nThe chip splitter produces narrow chips for efficient chip evacuation, enabling high feed rates.

Products September 6, 2023

CHAM-IQ-DRILL

The CHAM-IQ-DRILL design body is produced from special steel for high durability and a special stopper prevents the drilling head from being extracted upwards from the pocket. Long stoppers provide high resistance to cutting forces, enabling applications under very high cutting conditions. nHigh flute helix and polished flute surfaces provide a smooth and easy chip evacuation process. nAn internal coolant supply provides efficient cooling and lubrication during the drilling process.

Products September 6, 2023

LOGIQ-4-FEED

These inserts have 4 types of cutting geometries for machining different materials under diverse cutting conditions: T - Steel, ferritic and martensitic stainless steel, cast iron and hardened steel. HP - Austenitic stainless steel and high temperature alloys. RM-T - Interrupted cut for machining near straight wall shoulders of steel, ferritic and martensitic stainless steel, cast iron, and hardened steel. RM-HP - Interrupted cut for machining near straight wall shoulders of austenitic stainless steel and high temperature alloys. n

Products September 6, 2023

Logiq4Turn

The double-sided CXMG inserts operate similarly to CCMT positive inserts and can therefore replace standard CCMT inserts. In some applications, they can also replace standard negative CNMG inserts.nDouble-sided with a positive flank. Low cutting forces. Designed with a chipformer for general turning applications.

Products September 6, 2023

Dove IQ MILL 845

High positive cutter pocket inclination. Rigid clamping due to dovetail pocket design secured by clamping screws. Coarse and fine pitch cutter configurations. Coolant holes directed to every insert on the cutters. Precise double-sided square insert. Eight cutting edges – each edge comprises a reinforced edge and a wiper flat for a high quality machined surface.

Products September 6, 2023

Current1 Older

SumoCham

The DCN drills feature cylindrical shanks, which enable clamping of the drill in hydraulic toolholders (most recommended) or in spring collets. All drill bodies feature helical coolant holes. Prior to using the 12xD drill, it is recommended to drill a pre-hole by using a DCN 1.5xD drill or a centering drill.

News September 5, 2023

United Grinding showcases equipment at EMO Hannover 2023

The United Grinding Group is showcasing 16 grinding machines, new innovations and updates at the EMO 2023 trade show in Hannover, Germany.

Videos September 1, 2023

Perfect dimensional stability

Whether it is groove turning holders and grooving systems for radial grooving, parting off, axial grooving and internal grooving, indexable inserts with new parting-off or groove turning geometries or tailored cutting tool materials and coatings, etc. — the comprehensive range of Walter parting-off tools enables you to achieve top performance.

Keep scrolling

« Previous 1 … 116 117 118 119 120 … 1,432 Next »

Resources

Resources

Machining Fundamentals & Tooling References

Process Spotlights & Manufacturing Systems

Do more with CTE

Keep exploring

Keep exploring

Browse results

Explore

Address:

Follow