Resources
CTE
Resources
Curated machining knowledge, tools, and pathways — organized by purpose.
MFGAxis — Buyer’s Guide
Company listings, capabilities, certifications, and specialties — organized for buyers and engineers.
Machining References
Curated technical references for machinists and engineers.
Machining Calculators
Feeds, speeds, formulas, and shop calculators.
Wire
Search-driven resource hub for wire.
Hypertherm
Search-driven resource hub for hypertherm.
Roll
Search-driven resource hub for roll.
James
Search-driven resource hub for james.
Molybdenum
Search-driven resource hub for molybdenum.
Ai
Search-driven resource hub for ai.
Vericut
Search-driven resource hub for vericut.
Siemens
Search-driven resource hub for siemens.
Fanuc
Search-driven resource hub for fanuc.
Turnkey
Search-driven resource hub for turnkey.
Super
Search-driven resource hub for super.
Robotmaster
Search-driven resource hub for robotmaster.
Pronest
Search-driven resource hub for pronest.
Online
Search-driven resource hub for online.
Tap
Search-driven resource hub for tap.
Optical
Search-driven resource hub for optical.
Machinist
Search-driven resource hub for machinist.
Broaching
Search-driven resource hub for broaching.
Fatigue
Search-driven resource hub for fatigue.
Photo
Search-driven resource hub for photo.
Makino
Search-driven resource hub for makino.
Erp
Search-driven resource hub for erp.
Countersink
Search-driven resource hub for countersink.
Flame
Search-driven resource hub for flame.
Fives
Search-driven resource hub for fives.
Centerless
Search-driven resource hub for centerless.
Garant
Search-driven resource hub for garant.
Filtration
Search-driven resource hub for filtration.
Go
Search-driven resource hub for go.
Dual
Search-driven resource hub for dual.
Okuma
Search-driven resource hub for okuma.
Acme
Search-driven resource hub for acme.
Tapping
Search-driven resource hub for tapping.
Raw
Search-driven resource hub for raw.
Co2
Search-driven resource hub for co2.
Pre
Search-driven resource hub for pre.
Total
Search-driven resource hub for total.
Moving
Search-driven resource hub for moving.
Abb
Search-driven resource hub for abb.
Formula
Search-driven resource hub for formula.
Pick
Search-driven resource hub for pick.
Automating
Search-driven resource hub for automating.
Sic
Search-driven resource hub for sic.
Pipe
Search-driven resource hub for pipe.
Coordinate
Search-driven resource hub for coordinate.
Tramp
Search-driven resource hub for tramp.
Thermal
Search-driven resource hub for thermal.
Cmm
Search-driven resource hub for cmm.
Ceramic
Search-driven resource hub for ceramic.
Case Hardening
Search-driven resource hub for case hardening.
Insert Geometry
Insert identification, lead angle, indexable insert geometry, and selection references.
Boring
Boring heads, U-axis systems, contour boring, and setup references.
Cutting Forces
Cutting-force formulas, machining power, chip load, and speed/feed references.
Workholding
Workholding strategy, zero-point clamping, fixturing, and setup efficiency.
Threading
Threading calculators, tapping guidance, thread milling, and related tooling.
Authors
Browse CTE contributors and subject-matter experts.
Glossary
Definitions of machining and manufacturing terms.
Machining Fundamentals & Tooling References
Core explainers and shop-floor references for speeds, feeds, forces, insert identification, heat treatment, and cutter geometry.
Process Spotlights & Manufacturing Systems
Inspection, automation, digitalization, and application-specific reads that complement the core machining references above.
Do more with CTE
Keep exploring
Stay in the same scroll flow with fresh CTE articles, videos, products, and news instead of hitting a dead-end landing page.
Browse
Keep exploring
Latest articles, videos, products, and news from across CTE that fit the same machining-learning path.
Browse results
LASER P 400 Series and LASER S 2500 U
As with all of GF Machining Solutions' LASER machines, the LASER P 400 series offers repeatable high performance, consistent accuracy and unvarying quality. Fully digitized texturing makes it easy to texture, mark, engrave and add functional surfaces to parts, molds and dies, even when dealing with complex 3D parts.
20-inch Arboga Gear Head Drill Press
The gear drive transmission delivers full power at any speed, driving the cutting tools at nearly 100% of the available motor horsepower. Helical ground gears ensure positive, quite operation and make speed changes fast and easy. The wide speed range makes this the ideal drill for drilling large to small diameter holes fast and easy.
Tru Temp 2nd GEN
Operating at the optimum temperature range of 200° – 210°F as the original Tru Temp XL, TRU TEMP 2nd GEN makes it easy to use in-house and operator friendly. The chemistry is easy to manage and contains no EPA regulated metals, so rinse waters are generally sewerable by neutralizing the pH with a typical discharge range of pH 7-11. Additionally, reaching this pH range takes only 20% of the acid than other processes. Since TRU TEMP 2nd GEN requires no effluent treatment, the initial capital investment is only about half of other blackening finishes.
Power skiving for electric vehicles
Manufacturers can achieve 90% machine use reduction with power skiving.
Rollomatic LaserSmart 510
Rollomatic LaserSmart 510. Watch Cutting Tool Engineering's video coverage, featuring original footage and context from the related product, process, event, or shop-floor demonstration.
Strausak ONE machine demo
Strausak ONE machine demo. Watch Cutting Tool Engineering's video coverage, featuring original footage and context from the related product, process, event, or shop-floor demonstration.
Best ways to choose a touch probe
For manufacturers looking to reduce setup times, increase machine usage time and improve the dimensional accuracy of the finished workpieces, touch probes can offer great advantages.
Microlution ML-5
The Microlution ML-5 is optimized for micro-scale holemaking and fine cutting, which it performs without creating any heat-affected zones. The machine's compact, high- performance, ultrafast femto laser reduces cycle times and tooling costs to enable the production of precision parts in seconds.
AgieCharmilles CUT P Pro Series/CUT X Series/FORM X 600/AC-FORM EDM
The AgieCharmilles CUT P Pro series of wire-cutting EDM machines is designed for increased productivity, always available and ideal for every application with the largest technology database. The series includes the CUT P 350 Pro, the 550 Pro and the 800 Pro with robust designs and intuitive HMI as well as several automation options for lights- out operation.n
Success Packs
The Success Packs, available in the tiered levels Bronze, Bronze +, Silver or Silver +, are designed to improve machine lifecycles, maximise ROI, and offer a direct line to GF Machining Solutions experts, enabling customers to achieve their desired business growth and maximize their productivity goals. Each Success Pack is customized to a specific customer profile and offers benefits such as faster access to service, 24-hour machining and support helplines, remote assistance, maintenance and servicing as well as targeted support and consultations from experts.
WorkPartner 1+ (WPT 1+)
GF Machining Solutions offers eight WPT 1+ models. Shops can start with a single magazine unit and then add one more as production needs change. The systems easily serve one or two machines within in a production cell thanks to the flexibility of the magazine capacities and its variants (Light, Heavy or a Rotary magazine), along with fully integrated pneumatic control for gripping devices and table chucks. Large doors allow for fast and easy loading and unloading to help shorten changeover cycle times for both low and high-volume applications.
Mikron MILL P 800 and 900
The Mikron MILL P 800 U S allows shops to machine components fully on a single machine and eliminate transfer-related part errors, along with stacked tolerances, for enhanced quality of finished parts. This scalable solution is perfectly suited for automation, with a smaller footprint compared to the Mikron MILL P 800 U. This makes it the ideal machine when using two machines or more. It has a maximum loading capability of 1,000 kg (2,204.62 lbs) and is suitable for heavy roughing to fine finishing.
