Resources
CTE
Resources
Curated machining knowledge, tools, and pathways — organized by purpose.
MFGAxis — Buyer’s Guide
Company listings, capabilities, certifications, and specialties — organized for buyers and engineers.
Machining References
Curated technical references for machinists and engineers.
Machining Calculators
Feeds, speeds, formulas, and shop calculators.
Wire
Search-driven resource hub for wire.
Hypertherm
Search-driven resource hub for hypertherm.
Roll
Search-driven resource hub for roll.
James
Search-driven resource hub for james.
Molybdenum
Search-driven resource hub for molybdenum.
Ai
Search-driven resource hub for ai.
Vericut
Search-driven resource hub for vericut.
Siemens
Search-driven resource hub for siemens.
Fanuc
Search-driven resource hub for fanuc.
Turnkey
Search-driven resource hub for turnkey.
Super
Search-driven resource hub for super.
Robotmaster
Search-driven resource hub for robotmaster.
Pronest
Search-driven resource hub for pronest.
Online
Search-driven resource hub for online.
Tap
Search-driven resource hub for tap.
Optical
Search-driven resource hub for optical.
Machinist
Search-driven resource hub for machinist.
Broaching
Search-driven resource hub for broaching.
Fatigue
Search-driven resource hub for fatigue.
Photo
Search-driven resource hub for photo.
Makino
Search-driven resource hub for makino.
Erp
Search-driven resource hub for erp.
Countersink
Search-driven resource hub for countersink.
Flame
Search-driven resource hub for flame.
Fives
Search-driven resource hub for fives.
Centerless
Search-driven resource hub for centerless.
Garant
Search-driven resource hub for garant.
Filtration
Search-driven resource hub for filtration.
Go
Search-driven resource hub for go.
Dual
Search-driven resource hub for dual.
Okuma
Search-driven resource hub for okuma.
Acme
Search-driven resource hub for acme.
Tapping
Search-driven resource hub for tapping.
Raw
Search-driven resource hub for raw.
Co2
Search-driven resource hub for co2.
Pre
Search-driven resource hub for pre.
Total
Search-driven resource hub for total.
Moving
Search-driven resource hub for moving.
Abb
Search-driven resource hub for abb.
Formula
Search-driven resource hub for formula.
Pick
Search-driven resource hub for pick.
Automating
Search-driven resource hub for automating.
Sic
Search-driven resource hub for sic.
Pipe
Search-driven resource hub for pipe.
Coordinate
Search-driven resource hub for coordinate.
Tramp
Search-driven resource hub for tramp.
Thermal
Search-driven resource hub for thermal.
Cmm
Search-driven resource hub for cmm.
Ceramic
Search-driven resource hub for ceramic.
Case Hardening
Search-driven resource hub for case hardening.
Insert Geometry
Insert identification, lead angle, indexable insert geometry, and selection references.
Boring
Boring heads, U-axis systems, contour boring, and setup references.
Cutting Forces
Cutting-force formulas, machining power, chip load, and speed/feed references.
Workholding
Workholding strategy, zero-point clamping, fixturing, and setup efficiency.
Threading
Threading calculators, tapping guidance, thread milling, and related tooling.
Authors
Browse CTE contributors and subject-matter experts.
Glossary
Definitions of machining and manufacturing terms.
Machining Fundamentals & Tooling References
Core explainers and shop-floor references for speeds, feeds, forces, insert identification, heat treatment, and cutter geometry.
Process Spotlights & Manufacturing Systems
Inspection, automation, digitalization, and application-specific reads that complement the core machining references above.
Do more with CTE
Keep exploring
Stay in the same scroll flow with fresh CTE articles, videos, products, and news instead of hitting a dead-end landing page.
Browse
Keep exploring
Latest articles, videos, products, and news from across CTE that fit the same machining-learning path.
Browse results
DC165 Advance
The drills are coolant-through, straight flute (G-drills), with emulsion or oil and coolant pressure of 145-580 PSI (10-40 bar). They are offered in cylindrical shank configuration and have a 120° point angle with tolerance of m7.
Talking points with Sandvik Coromant’s Helen Blomqvist
She began her role as president of AB Sandvik Coromant in Sandviken, Sweden, nearly two years ago, but Helen Blomqvist started working at the toolmaker as a research engineer about two decades ago.
MX-System
As a modular control cabinet replacement that can also be decentralized on the machine if required, the MX-System saves engineering, assembly, installation and maintenance efforts. This promotes highly efficient processes for the manufacturers and operators of machines and systems – from the planning, setup and installation of the MX-System through to the maintenance of MX-System-equipped machines.
FormControl X
While the previous FormControl version (without the "X") was based on a scenario in which a machine operator works at a machine with the laptop and processes the measurements at the same time, the trend today is moving toward automating such processes, meaning this 1:1 relationship is now fairly rare.
MERLIC 5.2
MERLIC 5.2 is a logical continuation of the approach taken since MERLIC 5, namely to provide customers with the latest deep learning features that are also easy to use. Global Context Anomaly Detection is now being added to the proven deep learning functions Anomaly Detection and Classification (from MERLIC 5) and Deep OCR (from MERLIC 5.1).
Mitsubishi Electric’s products for a resilient, sustainable future
Mitsubishi Electric Automation Inc. exhibited innovative solutions for a resilient and sustainable future at IMTS. The company previewed its enhanced CNC controller, the M800V/M80V Series, which is currently slated for an early 2023 release in the Americas.
MarSurf CD 140 AG 11
MarSurf CD 140 AG 11 features an automated calibration routine for probe arms and a flexible workpiece holder that makes it easy to handle. Automatic tracing force selection assures the proper force is used when replacing several stylus tips.
GENOS M560V-5AX Machining Center
The GENOS M560V-5AX is built with a double-column machine design, affording it maximum structural integrity. The machine offers an impressive working envelope with a 500mm table and wide axis travels (X: 1,050 mm, Y: 560 mm, Z: 460 mm), while still maintaining a compact footprint of 2,515 mm x 3,750 mm.
ECO Suite Plus
ECO suite plus builds upon the prior technology releases by providing management and control of specific machine operations and peripheral devices during the machining process and in idle mode. Both the Thermo-Friendly Concept and ECO technologies are powered by Okuma's proprietary OSP control, a Windows-based, open-architecture platform which offers maximum machining capabilities to users.
Vantage Max Laser Trackers
The Vantage Max enables organizations to increase their throughput while maintaining high inspection accuracy with an attractive 3D metrology option that expands upon the proven track record of the FARO Vantage series. The trackers maximize 6 degrees of freedom (6DoF) measurement capabilities via the optional 6Probe, enabling precise measurement of hidden areas and small features.
FlexiumPro CNC Platform
FlexiumPro's Real-Time Kernel (RTK) hosts an embedded Codesys V3 PLC and a CNC unit. Based on a multi-core ARM processor, the RTK is implemented using advanced system-on-chip (SoC) technology. The tightly integrated nature of this technology helps to significantly reduce the component count, resulting in improved system reliability and compactness.
Renishaw showcases factory-of-the-future technologies
Global engineering technologies company Renishaw demonstrated at IMTS its latest metrology and manufacturing equipment that the company says will help customers digitalize their processes.
