Resources
CTE
Resources
Curated machining knowledge, tools, and pathways — organized by purpose.
MFGAxis — Buyer’s Guide
Company listings, capabilities, certifications, and specialties — organized for buyers and engineers.
Machining References
Curated technical references for machinists and engineers.
Machining Calculators
Feeds, speeds, formulas, and shop calculators.
Wire
Search-driven resource hub for wire.
Hypertherm
Search-driven resource hub for hypertherm.
Roll
Search-driven resource hub for roll.
James
Search-driven resource hub for james.
Molybdenum
Search-driven resource hub for molybdenum.
Ai
Search-driven resource hub for ai.
Vericut
Search-driven resource hub for vericut.
Siemens
Search-driven resource hub for siemens.
Fanuc
Search-driven resource hub for fanuc.
Turnkey
Search-driven resource hub for turnkey.
Super
Search-driven resource hub for super.
Robotmaster
Search-driven resource hub for robotmaster.
Pronest
Search-driven resource hub for pronest.
Online
Search-driven resource hub for online.
Tap
Search-driven resource hub for tap.
Optical
Search-driven resource hub for optical.
Machinist
Search-driven resource hub for machinist.
Broaching
Search-driven resource hub for broaching.
Fatigue
Search-driven resource hub for fatigue.
Photo
Search-driven resource hub for photo.
Makino
Search-driven resource hub for makino.
Erp
Search-driven resource hub for erp.
Countersink
Search-driven resource hub for countersink.
Flame
Search-driven resource hub for flame.
Fives
Search-driven resource hub for fives.
Centerless
Search-driven resource hub for centerless.
Garant
Search-driven resource hub for garant.
Filtration
Search-driven resource hub for filtration.
Go
Search-driven resource hub for go.
Dual
Search-driven resource hub for dual.
Okuma
Search-driven resource hub for okuma.
Acme
Search-driven resource hub for acme.
Tapping
Search-driven resource hub for tapping.
Raw
Search-driven resource hub for raw.
Co2
Search-driven resource hub for co2.
Pre
Search-driven resource hub for pre.
Total
Search-driven resource hub for total.
Moving
Search-driven resource hub for moving.
Abb
Search-driven resource hub for abb.
Formula
Search-driven resource hub for formula.
Pick
Search-driven resource hub for pick.
Automating
Search-driven resource hub for automating.
Sic
Search-driven resource hub for sic.
Pipe
Search-driven resource hub for pipe.
Coordinate
Search-driven resource hub for coordinate.
Tramp
Search-driven resource hub for tramp.
Thermal
Search-driven resource hub for thermal.
Cmm
Search-driven resource hub for cmm.
Ceramic
Search-driven resource hub for ceramic.
Case Hardening
Search-driven resource hub for case hardening.
Insert Geometry
Insert identification, lead angle, indexable insert geometry, and selection references.
Boring
Boring heads, U-axis systems, contour boring, and setup references.
Cutting Forces
Cutting-force formulas, machining power, chip load, and speed/feed references.
Workholding
Workholding strategy, zero-point clamping, fixturing, and setup efficiency.
Threading
Threading calculators, tapping guidance, thread milling, and related tooling.
Authors
Browse CTE contributors and subject-matter experts.
Glossary
Definitions of machining and manufacturing terms.
Machining Fundamentals & Tooling References
Core explainers and shop-floor references for speeds, feeds, forces, insert identification, heat treatment, and cutter geometry.
Process Spotlights & Manufacturing Systems
Inspection, automation, digitalization, and application-specific reads that complement the core machining references above.
Do more with CTE
Keep exploring
Stay in the same scroll flow with fresh CTE articles, videos, products, and news instead of hitting a dead-end landing page.
Browse
Keep exploring
Latest articles, videos, products, and news from across CTE that fit the same machining-learning path.
Browse results
ELM72xx EtherCAT Terminals
The ELM72xx modules' metal housings provide optimum heat dissipation even at high output power as well as optimal shielding against electrical interference. The new servo terminals can connect directly to other EtherCAT Terminals as an integrated component of the Beckhoff I/O system. The comprehensive functionality includes the direct connection of the motor, feedback and brake via the convenient connector front end, an integrated absolute value interface and One Cable Technology (OCT).
GWS Tool Group names key personnel
GWS Tool Group in Tavares, Florida, has bolstered its applications and sales expertise in California and Northern Mexico with the appointment of two specialists.
quattroClean Snow-Jet Technology
The core of the cleaning system is a wear-free, two-component ring nozzle through which the non-flammable and non-toxic carbon dioxide is fed. On exiting the nozzle, the carbon dioxide expands to form fine CO2 snow, which is then bundled by a separate jacketed jet of compressed air and accelerated to supersonic speed.n
CFast Memory Card F-800
The F-800 series is available in various capacities from 2 to 64 GB and is characterized by low power consumption and low heat generation. Sophisticated firmware functions for active and passive data maintenance and the protection against data loss in the event of power failure ensure reliable data retention. Through the provision of detailed lifetime information, long maintenance cycles can be easily scheduled. F-800 is specified for an operating temperature range from -40 to +85 °C.
T40CB TorqueTransducer
This compact model, measuring a mere 49mm/54mm in length and the central bore hole with a diameter of 37.5mm/ 46.5mm, provides technicians with the flexibility and user-friendliness necessary for carrying out application tests on automotive parts, such as coaxial transmissions or gearboxes.n
xsTECH Router Mill
The xsTECH is small but features big capabilities for cutting plastics, wood, and aluminum. An ideal starter CNC system for students learning CNC fundamentals, the xsTECH comes ready to run and requires no assembly. It plugs into a standard 120V wall outlet and for those outside of the US, a 230V version is available.
ASTM E2737 Detector Evaluation Package
The new ASTM E2737 Detector Evaluation Package is available to suit the entire range of Nikon Metrology's X-ray CT inspection, metrology and large envelope CT systems. All of the manufacturer's X-ray sources are supported including rotating target technology and the world's only 450kV microfocus source, in addition to the full range of industry-leading detectors.
Pandemic, labor and productivity needs are drivers for automation
More than a third of manufacturers say the Covid-19 pandemic is a catalyst for increasing automation, and additional drivers for adding and expanding automation include the need for increased productivity and a shortage of skilled workers, according to a new survey from MC Machinery of Elk Grove Village, Illinois.
DX4 Servo drive and MX Servo Motor Series
The launch of the new DX4 servo drive and MX servo motor series expands Trio's machine solution and now makes it faster and easier for OEMs to utilize the high performance motion control available from Trio's range of Motion Coordinators. The DX4 servo drive has plug-and-play compatibility with Trio's controllers and slice I/O systems, all programmed within a single software, Motion Perfect 5. This increases the speed of application development and commissioning for OEMs in industries including packaging, medical, metal, CNC, robotics and 3C. The DX4 servo drive operates at 200V AC and power extends from 50W to 3kW.
WBH20, WBS10 CBN Grades
WBH20 is a grade well suited for ISO-H Group of material such as for hard turning applications. WBS10 is well suited for ISO-S materials, specifically nickel-based (such as Inconel), iron-based (such as Udimet) or cobalt-based (such as Hayens).
Larger Measurement Range for MCS10 Multicomponent Sensor
As part of the well-known MCS10 series, this latest version features capacities double the size of the previous version, making it suitable for nominal loads of 40 kN for Fx/Fy, 200 kN for Fz, 3.5 kNm for Mx/My and 3.0 kNm for Mz. The sensor also offers high accuracy, IP67 protection, low crosstalk, compensation matrixes, TEDS and a wide temperature range.
3DViewStation V2020.1
These tools, from clearance calculation to wall thickness analysis, form a comprehensive combination of complementary functions for digital product development - something otherwise reserved for expensive CAD systems. Together, with an intuitive interface, these features support users from different fields of expertise in making quick and reliable decisions.n
