Materials/Steel

The Iosso-FE process increases the hardness of the surface up to 72 R.C. and significantly increases the base metal life expectancy. The FE process provides smooth and consistent results, free from hydrogen faults, cracks, or blisters. You should also not expect any peeling, flaking, or spalling with our process. We provide one of the safest and most durable plating processes in the market, which is Rohs compliant and TCHP compliant.

Parylene is the ultimate protective coating, and is used for customers that require protection of equipment, components, and surfaces in a range of end-use applications. Parylene is a hydrophobic polymer which is lightweight and can be applied as an extremely thin homogeneous film. This film is absolutely smooth and totally transparent, and does not cause any unwanted effects such as surface tension and distortion. The coating provides incredible resistance to aggressive media and liquid hydrocarbons, and can also be used as a diffusion barrier to gases.

EcoShield® 386 FD Water Based Micro Corrosion Inhibiting Coating is a force-dry version of Cortec’s top water-based anticorrosion coating, EcoShield® VpCI®-386. As such, EcoShield® 386 FD offers excellent corrosion protection at 1.5-3.0 mils (37.5-75 µm) DFT (dry film thickness). The advantage is that EcoShield® 386 FD force-dries in only 5-10 minutes at 150 °F (54 °C) and has good hot hardness, which keeps the hot coated parts from sticking together before they can cool down.

This media has a patented shape without any flat, parallel surface areas. On the one hand this unique design prevents media lodging in the work pieces, which can occur particularly in case of complex work pieces. Such lodged media can severely affect the finishing process and must frequently be removed by hand. On the other hand, the shape with its rounded surface areas allows the surface refinement of work pieces, which to-date could not be handled by mass finishing at all or only with very complicated operational setups. This includes components with difficult-to-reach surface areas like tight radii, undercuts, notches and slits, which can frequently be found in stamped and bent components.

Operating at the optimum temperature range of 200° – 210°F as the original Tru Temp XL, TRU TEMP 2nd GEN makes it easy to use in-house and operator friendly. The chemistry is easy to manage and contains no EPA regulated metals, so rinse waters are generally sewerable by neutralizing the pH with a typical discharge range of pH 7-11. Additionally, reaching this pH range takes only 20% of the acid than other processes. Since TRU TEMP 2nd GEN requires no effluent treatment, the initial capital investment is only about half of other blackening finishes. 

Drawing on its deep materials science expertise, Kennametal developed KAR85-AM-K to provide corrosion and wear resistant properties analogous to its conventional counterpart grade, CN13S. Combined with Kennametal’s binder jet additive manufacturing capabilities, KAR85-AM-K results in fully densified, corrosion resistant components that meet or exceed the properties of conventionally manufactured carbide components.

 VpCI-369 is an oil-based temporary coating that provides extreme corrosion protection in aggressive environments and is one of Cortec’s most-popular wet film corrosion inhibitors. It is an excellent option for protecting auto service parts and heavy equipment components before assembly. Since VpCI-369 is thixotropic, it can be mixed so that the product changes consistency to enhance sprayability for application with an airless sprayer. Once applied, it thickens so that it does not run off the metal. VpCI-369 can be tinted to blue, green, or other custom colors if desired to help workers detect sufficient product coverage.

A member of the Walk-A-Sured® Water Clear Epoxy System, this eco-friendly, two-component epoxy system meets OSHA and ADA standards, and ASTM slip-resistance requirements.  It contains 100% solids, with no solvents or VOCs, ensuring compatibility with previously installed coatings.  Water, solvent and chemical resistant Walk-A-Sured® Water Clear HEAVYDUTY 20 contains polymer grit which gives the coating long-lasting added traction.   It is ideal for use on industrial floors by machining centers and other oil-prone areas, in auto service stations where oil and grease are common, in ski resorts where floors are normally wet, and other manufacturing/industrial/commercial environments. 

The diamond coating portfolio covers the entire spectrum of demanding machining applications and is divided into two groups of different base materials. The first contains coatings for machining highly abrasive compacted and sintered powders like graphite for moulds and dies, as well as ceramics for dental applications. For these applications, the BALDIA COMPACT and BALDIA COMPACT DC coatings produce the best possible machining performance. The second group of base materials are fibre-reinforced plastics, stack materials and highly abrasive aluminium alloys used in the aerospace and automotive industries. For this group, BALDIA NANO and BALDIA COMPOSITE DC are the right choice. In both groups the ending “DC” stands for maximum coating quality with consistently high tool performance and the tightest possible tolerances for tool diameter and coating thickness.

The EZ-Puller is an auto-adjusting bar puller that enables automatic operation of CNC lathes. The auto adjust feature is driven by an "X" value in the pulling subroutine of a lathe program. This value represents the distance the tool needs to move in the X-axis according to the bar diameter being pulled. 

The newest addition to the group is JP0 for continuous cuts when finishing HRSA parts and machining at 700 up to 1600 SFM. It brings improved wear resistance to provide performance and consistency of machined part straightness.

The newest addition to the group is JP0 for continuous cuts when finishing HRSA parts and machining at 700 up to 1600 SFM. It brings improved wear resistance to provide performance and consistency of machined part straightness.

CeramiX HX5 Grade succeeds in matching the performance characteristics of CBN with the added benefit of being a less expensive product compared to CBN. A special TiAlN coating offers excellent wear resistance for hard turning applications.

Dragonskin is formulated with a combination of state-of-the-art high-performance substrates and the latest coating structures to achieve an extremely hard and durable satin finish. CERATIZIT tooling coated with Dragonskin enables maximum tool life, cutting speeds, and process reliability.

In clamping tests, Carbinite has been shown to nearly double the gripping strength at equal clamping force.  Customers report increased grip and longer tool life.  Utilizing a process called Electro Spark Deposition (ESD), Carbinite can be added to hard or soft jaws after they are milled to customer requirements.  The wear resistant carbide alloys display exceptional bond strength without annealing or distortion. 

Both versatile and impact-resistant, BigRep's new ABS (Acrylonitrile Butadiene Styrene) is perfectly suited for mobility applications and a variety of end-use consumer appliances. Weather- and UV-resistant, BigRep’s new ASA (Acrylonitrile Styrene Acrylate) material is a robust, engineering-grade filament with high mechanical resistance, low shrinkage and superior layer adhesion, while also showing a greater heat resistance than even ABS.

The system allows a high coating speed. The coating medium can also be changed in a very short time, thanks to the system’s automated cleaning process for all system components carrying operating supplies.

Custom engineered clad metal wire composites that can achieve specific properties for use in harsh environments, inside or outside of the human body, has been introduced by Anomet Products.

Copper Development Association Inc. (CDA) has launched its Machine Tool Payback Calculator, a tool designed to help manufacturers realize the greater profitability and throughput they can achieve with brass on modern machine tools. The calculator enables shops to input their individual production, material and equipment data to assess the impact of new technology on their bottom lines.

The new Eriez NanoRanch A.I. (Artificial Intelligence) Sorter uses vision to identify and sort a vast and customizable range of nonferrous materials, providing greater than 95 percent accuracy when the machine is trained with samples.

Special shaft collars and couplings that can be machined from wide range of materials to meet strict OEM design requirements are being introduced by Stafford Manufacturing Corp.

WDS offers stainless steel versions of many of the components that it supplies to machine and equipment builders across the UK and around the world. Wherever possible it offers stainless steel versions of its most popular components.

As a market-leading photo chemical etching specialist for over 50 years, Precision Micro has developed etchant chemistries and processes that make etching possible on a wide range of metals. Stainless steel, however, remains the number one choice for many of the company’s customers due to its versatility, the numerous grades available, and the vast array of finishes. Precision Micro etches more than two million steel and stainless steel components each month, making it the largest sheet etching company in Europe.

Custom composite clad metal wire that can combine the properties of several materials where solid wire is limited or too expensive is available from Anomet Products. In addition to serving OEMs, the firm is seeking wire suppliers who want to expand their product offerings.

Formulators looking to enhance the corrosion protection of increasingly popular water-based coatings systems can now use Cortec’s M-120, a water-based corrosion inhibitor additive that does not contain heavy metals. M-120 can be used alone or in conjunction with other inhibitors to increase the corrosion protection abilities of both water-based and solvent-based systems. It is recommended for use in acrylic and alkyd resin systems.

Buffalo Precision Products announces the launch of a new web shop for precision flat ground and drill rod. The new web shop offers buyers access to an extensive offering of grades and sizes through a modern buying interface. With improved features to make buying efficient, fast and secure, the company looks forward to being the online source for all of your flat ground and drill rod needs.

Standard and custom machined parts made from corrosion-resistant 316 stainless steel for use in wastewater treatment facilities and similar harsh environments are available from Stafford Manufacturing Corp.

Vapor Technologies Inc. (VaporTech) announces the launch of the VT-i series PVD coating machines: Brand-new equipment that meets today’s needs for efficiency, cost-control, and product quality and differentiation.

Custom manufactured clad metal wire designed for specific performance characteristics such as corrosion resistance, biocompatibility and more have been introduced by Anomet Products.

A full line of highly spherical sapphire and ruby balls with precise surface finishes for applications requiring superior hardness and chemical resistance are available from Meller Optics Inc.

Cincinnati Inc. has released a new carbon fiber resin material for its SAAM (Small Area Additive Manufacturing) 3D printing system. The new material is impact resistant, lightweight and has a very high strength-to-weight ratio. Carbon fiber reinforcement makes the material stiff, durable and very low warping – and advanced inter-layer adhesion results in accurate, quality parts with good dimensions. The material’s superior surface finish makes it perfect for custom tooling applications, as well as assembly, CMM, welding and CNC fixtures.

With more than 80 years of expertise in the metal processing/coil industry and an extensive range of process solutions for pickling, lubrication, cleaning, pretreatment, passivation, coating and lamination, Henkel has firmly established itself as a global one-stop partner of the metal coil industry. New product innovations are strongly focused on helping customers manage the process needs of next-generation alloys while meeting cost and regulatory challenges.

Eriez offers quick shipping on its two newest metal detector/magnetic separator “Double Team” systems to meet customers’ most urgent requirements for protection against ferrous and nonferrous metal contamination. These compact systems provide cost-saving benefits and produce as close to a perfect product yield as possible.

Kyocera Corp. announced that it has developed a new ultradurable coating technology and base material for indexable industrial cutting tool inserts to improve steel machining. The new CA025P CVD coated carbide grade will be available to the U.S. market from the middle of May 2018.

Now there’s a better way to protect small quantities of iron and steel parts from corrosion with Birchwood Technologies’ BK-1 Mini PRESTO BLACK finishing line. It’s fast, easy and economical.

Finnish nanodiamond manufacturer Carbodeon and Dutch 3D printing specialist Tiamet 3D have announced nanodiamond-enhanced filaments for 3D printing. The Carbodeon/Tiamet 3D filaments are based on a jointly patented technology, which significantly improves the mechanical and thermal properties of 3D printed items.

No. 836 is a 750° F electrically heated Class 100 clean room oven from Grieve, currently used to bake various coatings onto products at a customer’s facility.

Designed for use on any size parts, the new Presto Black Gel, Antique Brown Gel, and Antique Black Gel formulations solve the application challenges of liquid products while producing an attractive, high quality, durable darkened finish.

In a continuing quest to enhance customer service, Solar Atmospheres of Western PA has expanded its wings by adding another type of mechanical testing to its repertoire: tensile testing. Tensile tests are essential in determining and understanding the ultimate strengths of materials.

FTT says its in-house PVD coating is yet another example of its commitment to maintaining the latest technology in-house to provide the highest-quality, timely and efficient service to customers. These types of coatings protect the tools from heat and abrasion.

Henkel Adhesive Technologies has sharpened the market fit of its Bonderite L-FM FL portfolio of polymeric coatings for the surface conversion of metals used in cold forming operations. The optimized Bonderite L-FM FL process reduces the number of treatment steps from as many as 10 to one or two and is emerging as an attractive alternative in the production of high-performance automotive bolts and screws, according to the company.

New Presto Black SSB room temperature stainless steel blackening process is an immersion or brush-on solution for most stainless steel alloys and substrates. Creating an esthetic appealing finish, Presto Black SSB can be used in production finishing, for manual touch-up needs, or for distressed decorative or architectural metalworking.

InterCoat ChemGuard from Chemcoaters Inc. is a new type of corrosion protection for galvanized steel. InterCoat ChemGuard uses a new type of coating technology that incorporates covalent bonds and enhances the effectiveness of zinc and substantially improves corrosion protection on galvanized steel.

Hypertherm introduces the availability of FlushCut consumables for more Powermax plasma systems. These new consumables are designed to work at 45 amps on Powermax45 XP, 65, 85, and 105 systems. In addition, owners of the original Powermax45 can use the consumables provided they upgrade to a Hypertherm Duramax series torch. Previously, FlushCut consumables were only recommended for use on Powermax105 and Powermax125 systems.

Parker Steel Co. offers a large supply of metric-sized metals, ideal for applications where pre-sized metric parts are needed. Parker Steel’s cold-finished carbon steel, alloyed and high-strength stainless steel, aluminum, copper, brass and tool steel bars/shafting, tubing, sheets and plates, angles, channels and tees; and other specialty shapes can be shipped out the same day as ordered with few exceptions.

The Hexagon Manufacturing Intelligence Composite Inspection System comprises HP-C-V3D Apodius Vision Sensor hardware – designed to fit to a ROMER Absolute Arm with Integrated Scanner – together with a custom-built Apodius Explorer 3D software package.

Since introducing the Shred1 Ballistic Separator 6 years ago, Eriez has installed units in various shredding yards, steel mills and slag processing facilities throughout North America. These innovative separators utilize ballistics to upgrade frag by segregating the copper bearing materials from the rest of the ferrous materials. Customers using Shred1 Ballistic Separators report increased revenues and reduced overhead.

Carr Lane Mfg. Co. offers a new LIFE-EX PVD coating as an option on its round and diamond pins. So hard it cannot be measured on the Rockwell C scale, LIFE-EX is a thin film of vaporized solid metal that has been deposited onto Carr Lane’s round and diamond pins as a pure metal or alloy coating.

Introduced in 2010 and originally marketed primarily for scrap recycling, Eriez P-Rex rare earth scrap drums are now successfully operating across North America in a variety of recycling sectors. The P-Rex is proving its value in the field--beyond scrap recycling operations--by boosting ferrous recovery rates for waste-to-energy and slag recycling facilities, according to the company.

Nanodiamond material specialist Carbodeon of Finland has worked with metal finishing specialist CCT Plating of Germany to develop a new electroless nickel, PTFE and nanodiamond composite coating. Electroless nickel-PTFE (EN-PTFE) coatings provide excellent anti-adhesive and low friction properties but are traditionally soft and wear quickly in abrasive conditions. By adding NanoDiamond particles to the EN-PTFE coating, Carbodeon has been able to improve the abrasive wear resistance of these coatings without compromising the sliding or release properties.

The BONDERITE C-CP process from Henkel for pickling stainless steel is reportedly providing users with important cost and environmental benefits. Together with Henkel’s expertise and service, it has already provided advantages for several of Henkel’s customers in Italy and the Far East, where this technology has been introduced as an alternative to mixed acid processes.

Parker Steel Co. offers a large supply of metric-sized metals in North America. Suitable for applications where presized metric parts are needed, Parker’s cold-finished carbon, alloyed and high-strength stainless steel bars/shafting, tubing, sheets and plates; carbon and stainless angles, channels and tees; and carbon beams can be shipped out the same day as ordered with few exceptions.

Seco Tools new TP3501 grade is designed to provide optimal application security. The grade is for steel turning applications that involve numerous interrupted cuts, less stable machines, short time in cut or weak setups due to part size or shape.designed

Diehl Tool Steel offers Hitachi Metals America’s SLD-i cold work premium tool steel, an advanced tool steel grade used in various blanking and forming application where AHSS parts are processed. It is produced using the same heat treatment as D2 but exhibits better wear and toughness when used for forming sections.

The growth in the GDi market is staggering. In 2008 it was estimated that about 2% of cars built incorporated this technology, but recent predictions suggest that by 2020, 25% will include GDi systems as standard. This is great news for Precision Micro, the photo-etching specialist, which supplies photo-etched flexures used in GDis systems and this is stimulating major growth in the company.

Easily and securely installed by hand in an ordinary drill hole, self-retaining ball plungers from Carr Lane Mfg. Co. have a flexible design, and compensate for hole tolerances up to 0.008". The slotted end of the thermoplastic body expands to compensate in an oversize hole.

Stronghold Coatings introduces PlasticMetal, a two-component repair technology that can be mixed in various ratios for small and medium repairs to many types of metal. Unlike pre-mixed polymers, which have a set viscosity, this resin and powdered metal system can be mixed in small quantities in thicknesses to suit particular application requirements.

Cortec’s VpCI-368 coating has just become more powerful with the addition of extra vapor-phase corrosion inhibitors. Already, VpCI-368 provides excellent protection to metal substrates exposed to harsh outdoor conditions.

Sandvik Hyperion's BZN V-Series PCBN grades provide versatility in three key aspects of machining of hardened ferrous materials. First, the grades are able to work in case hardened, bearing steels, powder metal alloy steels, and tool steels.

Sandvik Hyperion's new AM60 carbide grade is an advanced substrate developed to increase machining productivity and performance for applications that require CVD diamond coating.

Sandvik Hyperion offers Compax veined PCD. This product offers diamond sintered within slotted veins oriented along a 30 degree helix angle. Its nibs are designed specifically for use in machining of CFRP and CFRP-metal stacks.

Sandvik Hyperion's carbide grade AM70 is an advanced substrate developed to increase machining productivity and performance in titanium and ISO M materials. The AM70 grade is comprised of a combination of submicron carbide grains that provide the perfect mix of toughness and wear resistance.

Sandvik Materials Technology offers Sanmac, a stainless steel material that can significantly increase machining rates. Year on year Sandvik Research & Development has applied and tested process improvements upgrading the melt of Sanmac material. The result is the introduction of new generation Sanmac, a dedicated stainless steel material available in a range of grades.

MK Tools solid-carbide round tools from Monaghan Tooling Group introduces new "Speed-Drill R4" geometry, reportedly offering unparalleled cutting speeds and unprecedented tool life when cutting gray cast iron, ductile iron and forged steel, which are popular materials in automotive engine and chassis components. With a new corner radius design which is tangential to the drill point but nontangential to the diameter, these proven designs address challenging, high production drilling applications.

Walter says it has unveiled a technology that promises to dramatically improve machining effectiveness. Called Tiger·tec Gold, it is the latest iteration of Walter’s successful line of Tiger·tec and Tiger·tec Silver coatings.

Compact and flexible, the AeroGo Air Caster Rigging Kit contains everything necessary to move heavy, awkward or delicate loads using compressed air. The kit is housed in a rugged and lockable storage box. The rigging kit system can be configured to accommodate numerous and varied load requirements in a variety of applications, handling load weights as heavy as 64,000 lbs.

Harman Corp. announces the availability of low-cost dip molding for custom shipped caps, plugs or handgrip applications. Harman offers in-house design and tooling capabilities and can provide prototypes within 7 working days. Tooling costs for dip molding are 1/10th the price of injection molding, according to the company.

Dorner’s newly redesigned 2200 series modular belt conveyor features additional belt options, a sleek open-frame design, a universal T-slot and is ideal for applications within the metalworking, packaging, assembling and general manufacturing industries. The product redesign includes a number of improvements.

Harrington Hoists Inc. has introduced its RCB Ex-certified spark-resistant hand chain hoists and RPT/RGT manual push and geared trolleys. These products are manufactured with materials that will reduce risk of sparks produced by impact or friction in heavy-duty industrial applications.

Fast response, high bandwidth and force, and virtually unlimited resolution make piezoelectric transducers invaluable to modern high tech applications including flow measurement, distance gauging, bio-medical dispensing and aerosol generation, as well as metrology, semiconductor testing, and aerospace technology. PI offers value-added piezo components by adhering flexible printed circuits for easy application integration.

Raptor-ready dovetail blanks from TCI Precision Metals are custom produced to your specifications and are machine-ready—order from one to thousands with quick turnaround. Each Raptor-ready dovetail blank includes a dovetail feature to match your specified fixture model and arrives machine-ready to go from receiving directly into your CNC machining centers.

The Magswitch Integrated Solutions (MIS) division is introducing new end of arm tool (EOAT) degaussing technology for magnetic material handling in industrial automation. This reportedly allows for a whole new range of material handling applications.

Featuring a nickel filler, Master Bond EP21TDCN-LO is an electrically conductive two-component adhesive/sealant that is particularly effective for grounding, shielding and static dissipation applications. It is a toughened system and is capable of withstanding rigorous thermal cycling, mechanical vibration and shock.

Vollmer of America's CHD270 is a sharpening machine with 8 CNC-controlled axes and a measurement device, and it's intended for the automatic machining of carbide-tipped circular saw blades with various diameters and tooth geometries on face and top. 

Harrington Hoists Inc. has introduced its new CX005 mini hand chain hoist. This hoist has a rated capacity of ½ ton and is the second model in the company's line of small and lightweight hand chain hoists.

For more than 550 Chainflex continuous flex cables, the process of stripping the cable jacket is quick, easy, and able to be done by hand. With an integrated “CFRIP” tear strip, the cable’s jacket is openable like a zip fastener, allowing up to a 50 percent reduction in stripping time.

Tech-Etch specializes in the photo chemical etching of tungsten. Because tungsten is extremely dense, 71 percent heavier than lead, it is used in medical applications, including grids used to collimate and attenuate stray X-rays in CT scanners, as well as ID tags used in implanted medical devices.

TigerStop offers an entirely updated version of its user-friendly, on-board, touchscreen material automation solution, TigerTouch. The new TigerTouch v1.2 is now capable of pack and panel processing and has greatly expanded printing capabilities, which include any printer with a Windows driver.

High-value tooling such as toolholders, workholding and turret press tooling takes on an attractive, protective black oxide finish when finished with the TRU TEMP low-temperature, nonpolluting black-oxide system from Birchwood Technologies. Extremely durable, the TRU TEMP process provides a satin black magnetite coating, 20 millionths thick (0.54 micron) with no effect on component material hardness or tensile strength.

Eriez suspended magnets, drum magnets and AIP magnetic pulleys are used to safely and efficiently recover ferrous metals. Technological advancements in separation equipment enable recovery of valuable ferrous and nonferrous metals less than 1-inch (2.54 cm) in diameter from the fines waste stream.

General Carbide has expanded its operations to produce more than 40 standard and custom sizes of wire EDM blocks for a range of stamping and fabricating applications. To help ensure that blocks are of the highest metallurgical quality and reach customers intact and quickly, the company processes every order in sinter-HIP furnaces, ships the blocks in durable packaging, guarantees turnaround of 3 to 5 business days and tracks shipments door-to-door.

In 2013 Eriez introduced the supersized 76 series vibratory feeder to satisfy customers’ largest application demands while enabling increased overhang. “Over the past 3 years, the 76 series vibratory feeder has demonstrated success in operations across various and diverse industries,” says Rob Yandrick, product manager-vibratory. “The 76 has become a popular choice to use with bucket elevators as well as bulk bag unloading, scale feeding and other challenging applications.”

Crystallume is pleased to present an extensive new catalog, highlighting all of its diamond tools and DCC coating services. The 24-page catalog is rich with information to help machinists navigate the immense selection of diamond tools available for all of your machining needs

International Mold Steel Inc. announced the results of a study that showed reduced vibration with Toolox 44 (made by SSAB) toolholders. A recent study conducted at the KTH Royal Institute of Technology of Sweden, compared Toolox 44 with conventional tool steel alloyed with chromium, molybdenum and vanadium.

Cortec VpCIs offer a range of innovative options for reducing manufacturing costs and corrosion. In the case of VpCI-371, Cortec’s protection reportedly rivals the corrosion resistance of stainless steel while significantly reducing material costs.

Manufacturers needing immediate corrosion protection on small quantities of parts can get it with all of the quality of larger finishing systems using Birchwood Technologies’ Mini PRESTO BLACK line. The BK-1 line is a low-cost alternative and/or substitute for large scale finishing. This mini PRESTO BLACK room-temperature blackening system for iron and steel from Birchwood Technologies is great for small production operations that require robust corrosion resistance and galling protection on critical surfaces for machine components.

Shape-Master Tool Co. has developed new combinations of PCBN grades and tool coatings for hard turning applications. The coatings are applied specific to each application. Manufacturers have experienced improved cutting performance and tool life.

Harrington Hoists Inc. offers the ED-V Mini electric chain hoist. It is a single-phase, single-speed hoist that features Smart Speed Technology, which allows users to change the factory set speed to a higher speed by making a simple adjustment inside the hoist when necessary.

Accudyne Products bar pullers, the EZ-Puller and the BigEZ, have a range of 0.093" to 1.750" and 1.625" to 3.00", respectively, and provide automatic bar stock advancement for CNC lathes.

CECOR heavy-duty carts can be fitted with frames that allow users to dump loads from a forklift or hook hoist. The frame is secured to the cart with trunnion pins, which can be adjusted to accommodate loads that range from light and bulky to heavy and dense.

Mersen USA offers ultrafine-grain graphite for sinker EDMing. The top-performing DS4, featuring the DarkStar ultrafine-carbon particle, helps users confidently handle challenging EDM operations while saving money, according to the company. The easy-to-machine and strong DS4 imparts a fine surface finish and intricate detail.

GenSwiss, Westfield, Mass., recently partnered with Louis Belet SA to become the exclusive North American representative for Louis Belet precision carbide cutting tools and PCD-tipped milling tools, according to a Feb. 17 news release from Genevieve Swiss Industries Inc.

Birchwood Technologies three brush-on metal blackeners—Presto Black BST4, Antique Black M24, and Aluma Black A14—are now available in smaller, quart sized (32 oz.) bottles for easier application and handling, at a new lower price point.

Walther Trowal GmbH & Co. KG, Haan, Germany, recently introduced "trowalplast HDC," a newly developed, fast-cutting plastic media said to be ideal for grinding and surface smoothing of metal workpieces, especially die-castings, the company announced in a Feb. 11 news release.

Tungaloy Corp. has introduced the AH8000 series of PVD grades and chipbreakers for turning heat resistant alloys. The new PVD grades feature impressive resistance to both wear and fracture due to the world’s first nano-multi-layered AlTiN coating with high Al content and dramatically reduces notch wear, crater wear and built-up edge in machining heat resistant alloys.

PFERD Inc., Milwaukee, Wis., today introduced Cast Cut, a new line of high-performance carbide burs specially designed for work on cast iron. The burs, which are characterized by an extremely high stock removal rate, reportedly offer a smooth milling action that significantly reduces vibration and noise. Cast Cut achieves stock removal rates up to 100 percent higher than conventional double-cut burs, thanks to its innovative tooth geometry—a major plus for automotive customers given the industry’s relentless drive to boost productivity and save time. Other key market applications include foundry, welding and general industry.

Fischer Technology Inc., a Windsor, Conn.-based manufacturer of instrumentation for coating thickness, material testing, nanoindentation and material analysis, announced plans to open a new office in Livonia, Mich., to provide technical sales and service support for the Michigan area.

Fischer Technology Inc., a Windsor, Conn.-based manufacturer of instrumentation for coating thickness, material testing, nanoindentation and material analysis, announced plans to open a new office in Livonia, Mich., to provide technical sales and service support for the Michigan area.

Dormer Pramet now offers Pramet SF and SM geometries for machining of high temperature alloys and stainless steel, the company announced Jan. 27. The SF geometry features a sharp positive geometry with an inclination cutting edge of 14.5° while the SM chip-breaker is a wear-resistant, universal geometry for medium machining.

In a news release issued Jan. 16, Walter USA LLC, Waukesha, Wis., unveiled its P6005-WKK45C point drill insert that reportedly brings new levels of performance and cost effectiveness to drilling cast materials (ISO K) as well as other materials. The P6005-WKK45C insert design features a new high-performance geometry for maximum productivity in cast iron materials, and 110° prismatic seat for minimal run-out and stable positioning.